FANDOM


Stamp

DescriptionEdit

Making personalized stamps is so much fun! With a slab of rubber and the right tools your only limit is your imagination. Use your stamp for anything you like – scrapbooking, block printing on fabric, cards and invitations, posters, even walls. Use water-based inks for easiest clean up and clean your stamps thoroughly with soap and water after use and be careful no ink is hiding in the crevices of your stamp…

Difficulty LevelEdit

ModerateEdit

MaterialsEdit

*Plain copy paper *A pencil (art pencil) *An eraser for fixing mistakes in your drawing *A thick piece of rubber or other material meant for carving stamps – (i.e. Speedball’s Speedy-Cut)

  • A carving tool (i.e., Speedball’s Lino Cut Assortment)
  • Ink specifically for your application (fabric, paper, cardstock, etc.) – just make sure it is a thicker ink if you plan to apply it with a roller. A water-based ink pad will work too for many stamping projects.
  • A piece of wood just larger than your final stamp to use as a backing

InstructionsEdit

DSCF0021-300x225
  • 1. Make a line drawing. If this is your first ever stamp-making project you might want to keep details to a minimum and stick with thick, wide lines. This will make it easier when it’s time to carve. You can either color in the areas you plan to carve with your drawing (this will be the space that doesn’t get inked) or the areas that will print so it will look more like your final piece as your carving it – just decide ahead of time and stick with it. There is no tracing needed- the Speedball material will actually pick up the outline of your drawing. Put your drawing face down on the material and rub the back of the paper with something hard and smooth. If you don't have a boning tool, the back of your lino cutting tool works too – just make sure you don’t have the sharp attachments on yet! Also, take care not to move the drawing once you have started transferring the image.
DSCF0025-300x225
  • 2. Once your image is sufficiently transferred onto your rubber material, you can begin carving out the details of your drawing. I start by outlining the areas with a small tool then cutting in with the larger tools. You’ll get a feel for the material as you work with it. It is extremely easy to cut which makes projects like this simple (imagine having to carve an intricate drawing in to wood!?) but that also means it is easy to carve out something you didn’t mean to. If this happens just go with it…maybe it was meant to be! If you have a big mess up you can always retrace your drawing and start over if you need to.
  • 3. Once you have cut out all the fine details you will need to remove the excess material from the sides so your image comes out cleanly. If you are used to creating shading and dimension in your artwork you can get a similar effect from making shallow, light, strategically placed cuts in your stamp. Glue your finished stamp to the wood backing…if you don’t put a backing on it, it’s wigglyness may cause an uneven impression on your finished piece.
DSCF0035-300x225

  • 4. Ink your rolling surface and get a good, even coating of ink on your roller. Roll the ink on to your stamp and test it on a non-essential piece of paper. You will likely see areas you need to fix in your stamp. Just cut these areas away, and test one more time before you’re ready to create you’re finished stamped piece.

External ReferencesEdit

This craft comes from craftbits.com

Ad blocker interference detected!


Wikia is a free-to-use site that makes money from advertising. We have a modified experience for viewers using ad blockers

Wikia is not accessible if you’ve made further modifications. Remove the custom ad blocker rule(s) and the page will load as expected.